This table documents the X11 xterm control sequences.

`BEL'
      Bell (Ctrl-G)

`BS'
      Backspace (Ctrl-H)

`HT'
      Horizontal Tab (Ctrl-I)

`NL'
      Line Feed or New Line (Ctrl-J)

`VT'
      Vertical Tab (Ctrl-K)

`NP'
      Form Feed or New Page (Ctrl-L)

`CR'
      Carriage Return (Ctrl-M)

`SO'
      Shift Out (Ctrl-N) -> Switch to Alternate Character Set

`SI'
      Shift In (Ctrl-O) -> Switch to Standard Character Set

`0x9B Ps t'
      WM thingies ?
      Ps = 1 -> Deiconify ?
      Ps = 2 -> Iconify ?
      Ps = 3 -> Sets geometry to +0+0 ?
      Ps = 4 -> Sets geometry to x5 ?

`0x05'
      Return "xterm" on stdin

`ESC BEL'
      (Same as non-escaped BEL)

`ESC BS'
      (Same as non-escaped BS)

`ESC HT'
      (Same as non-escaped HT)

`ESC NL'
      (Same as non-escaped NL)

`ESC VT'
      (Same as non-escaped VT)

`ESC NP'
      (Same as non-escaped NP)

`ESC CR'
      (Same as non-escaped CR)

`ESC SO'
      (Same as non-escaped SO)

`ESC SI'
      (Same as non-escaped SI)

`ESC # BEL'
      (Same as non-escaped BEL)

`ESC # BS'
      (Same as non-escaped BS)

`ESC # HT'
      (Same as non-escaped HT)

`ESC # NL'
      (Same as non-escaped NL)

`ESC # VT'
      (Same as non-escaped VT)

`ESC # NP'
      (Same as non-escaped NP)

`ESC # CR'
      (Same as non-escaped CR)

`ESC # SO'
      (Same as non-escaped SO)

`ESC # SI'
      (Same as non-escaped SI)

`ESC # 8'
      DEC Screen Alignment Test (DECALN)

`ESC ( BEL'
      (Same as non-escaped BEL)

`ESC ( BS'
      (Same as non-escaped BS)

`ESC ( HT'
      (Same as non-escaped HT)

`ESC ( NL'
      (Same as non-escaped NL)

`ESC ( VT'
      (Same as non-escaped VT)

`ESC ( NP'
      (Same as non-escaped NP)

`ESC ( CR'
      (Same as non-escaped CR)

`ESC ( SO'
      (Same as non-escaped SO)

`ESC ( SI'
      (Same as non-escaped SI)

`ESC ( C'
      Select G0 Character Set (SCS) 
      C = 0 -> Special Character and Line Drawing Set 
      C = 1 -> Alternate Character ROM Standard Set 
      C = 2 -> Alternate Character ROM Special Set 
      C = A -> United Kingdom (UK) 
      C = B -> United States (USASCII)

`ESC ) C'
      Select G1 Character Set (SCS) 
      C takes same values as above

`ESC * C'
      Select G2 Character Set (SCS) 
      C takes same values as above

`ESC + C'
      Select G3 Character Set (SCS) 
      C takes same values as above

`ESC 7'
      Save Cursor (DECSC)

`ESC 8'
      Restore Cursor (DECRC)

`ESC ='
      Application Keypad (DECPAM)

`ESC >'
      Normal Keypad (DECNM)

`ESC D'
      Index (IND)

`ESC E'
      Next Line (NEL)

`ESC H'
      Tab Set (HTS)

`ESC M'
      Reverse Index (RI)

`ESC N'
      Single Shift Select of G2 Character Set (SS2)

`ESC O'
      Single Shift Select of G3 Character Set (SS3)

`ESC [ BEL'
      (Same as non-escaped BEL)

`ESC [ BS'
      (Same as non-escaped BS)

`ESC [ HT'
      (Same as non-escaped HT)

`ESC [ NL'
      (Same as non-escaped NL)

`ESC [ VT'
      (Same as non-escaped VT)

`ESC [ NP'
      (Same as non-escaped NP)

`ESC [ CR'
      (Same as non-escaped CR)

`ESC [ SO'
      (Same as non-escaped SO)

`ESC [ SI'
      (Same as non-escaped SI)

`ESC [ ? BEL'
      (Same as non-escaped BEL)

`ESC [ ? BS'
      (Same as non-escaped BS)

`ESC [ ? HT'
      (Same as non-escaped HT)

`ESC [ ? NL'
      (Same as non-escaped NL)

`ESC [ ? VT'
      (Same as non-escaped VT)

`ESC [ ? NP'
      (Same as non-escaped NP)

`ESC [ ? CR'
      (Same as non-escaped CR)

`ESC [ ? SO'
      (Same as non-escaped SO)

`ESC [ ? SI'
      (Same as non-escaped SI)

`ESC [ ? Ps h'
      DEC Private Mode Set (DECSET) 
      Ps = 1 -> Application Cursor Keys (DECCKM) 
      Ps = 2 -> Set VT52 Mode 
      Ps = 3 -> 132 Column Mode (DECCOLM) 
      Ps = 4 -> Smooth (Slow) Scroll (DECSCLM) 
      Ps = 5 -> Reverse Video (DECSCNM) 
      Ps = 6 -> Origin Mode (DECOM) 
      Ps = 7 -> Wraparound Mode (DECAWM) 
      Ps = 8 -> Auto-Repeat Keys (DECARM) 
      Ps = 9 -> Send MIT Mouse Row & Column on Button Press 
      Ps = 38 -> Enter Tektronix Mode (DECTEK) 
      Ps = 40 -> Allow 80 <-> 132 Mode 
      Ps = 41 -> curses(5) fix 
      Ps = 44 -> Turn on Margin Bell 
      Ps = 45 -> Reverse-wraparound Mode 
      Ps = 46 -> Start Logging 
      Ps = 47 -> Use Alternate Screen Buffer 
      Ps = 1000 -> xtem bogus sequence (???) 
      Ps = 1001 -> xtem sequence w/hilite tracking (???)

`ESC [ ? Ps l'
      DEC Private Mode Reset (DECRST) 
      Ps = 1 -> Normal Cursor Keys (DECCKM) 
      Ps = 3 -> 80 Column Mode (DECCOLM) 
      Ps = 4 -> Jump (Fast) Scroll (DECSCLM) 
      Ps = 5 -> Normal Video (DECSCNM) 
      Ps = 6 -> Normal Cursor Mode (DECOM) 
      Ps = 7 -> No Wraparound Mode (DECAWM) 
      Ps = 8 -> No Auto-Repeat Keys (DECARM) 
      Ps = 9 -> Don't Send MIT Mouse Row & Column on Button Press 
      Ps = 40 -> Don't Allow 80 <-> 132 Mode 
      Ps = 41 -> No curses(5) fix 
      Ps = 44 -> Turn Off Margin Bell 
      Ps = 45 -> No Reverse-wraparound Mode 
      Ps = 46 -> Stop Logging 
      Ps = 47 -> Use Normal Screen Buffer 
      Ps = 1000 -> xtem bogus sequence (???) 
      Ps = 1001 -> xtem sequence w/hilite tracking (???)

`ESC [ ? Ps r'
      Restore DEC Private Mode 
      Ps = 1 -> Normal/Application Cursor Keys (DECCKM) 
      Ps = 3 -> 80/132 Column Mode (DECCOLM) 
      Ps = 4 -> Jump (Fast)/Smooth (Slow) Scroll (DECSCLM) 
      Ps = 5 -> Normal/Reverse Video (DECSCNM) 
      Ps = 6 -> Normal/Origin  Cursor Mode (DECOM) 
      Ps = 7 -> No Wraparound/Wraparound Mode (DECAWM) 
      Ps = 8 -> Auto-repeat/No Auto-repeat Keys (DECARM) 
      Ps = 9 -> Don't Send/Send MIT Mouse Row & Column on Button Press 
      Ps = 40 -> Disallow/Allow 80 <-> 132 Mode 
      Ps = 41 -> Off/On curses(5) fix 
      Ps = 44 -> Turn Off/On Margin Bell 
      Ps = 45 -> No Reverse-wraparound/Reverse-wraparound Mode  
      Ps = 46 -> Stop/Start Logging 
      Ps = 47 -> Use Normal/Alternate Screen Buffer 
      Ps = 1000 -> mouse bogus sequence (???) 
      Ps = 1001 -> mouse bogus sequence (???)

`ESC [ ? Ps s'
      Save DEC Private Mode 
      Same P's as Restore DEC Private Mode

`ESC [ Ps @'
      Insert Ps (Blank) Character(s) (default = 1) (ICH)

`ESC [ Ps A'
      Cursor Up Ps Times (default = 1) (CUU)

`ESC [ Ps B'
      Cursor Down Ps Times (default = 1) (CUD)

`ESC [ Ps C'
      Cursor Forward Ps Times (default = 1) (CUF)

`ESC [ Ps D'
      Cursor Backward Ps Times (default = 1) (CUB)

`ESC [ Ps ; Ps H'
      Cursor Position [row;column] (default = [1,1]) (CUP)

`ESC [ Ps J'
      Erase in Display 
      Ps = 0 -> Clear Below (default) 
      Ps = 1 -> Clear Above 
      Ps = 2 -> Clear All

`ESC [ Ps K'
      Erase in Line 
      Ps = 0 -> Clear to Right (default) 
      Ps = 1 -> Clear to Left 
      Ps = 2 -> Clear All

`ESC [ Ps L'
      Insert Ps lines (default = 1) (IL)

`ESC [ Ps M'
      Delete Ps lines (default = 1) (DL)

`ESC [ Ps P'
      Delete Ps Characters (default = 1) (DCH)

`ESC [ T'
      Track Mouse (???)

`ESC [ Ps c'
      Device Attributes (DA1)

`ESC [ Ps ; Ps f'
      Cursor Position [row;column] (default = [1,1]) (HVP)

`ESC [ Ps g'
      Tab Clear 
      Ps = 0 -> Clear Current Column (default) 
      Ps = 3 -> Clear All

`ESC [ Ps h'
      Mode Set (SET) 
      Ps = 4 -> Insert Mode (IRM) 
      Ps = 20 -> Automatic Linefeed (LNM)

`ESC [ Ps l'
      Mode Reset (RST) 
      Ps = 4 -> Insert Mode (IRM) 
      Ps = 20 -> Automatic Linefeed (LNM)

`ESC [ Pm m'
      Character Attributes (SGR) 
      Ps = 0 -> Normal (default) 
      Ps = 1 -> Blink (appears as Bold) 
      Ps = 4 -> Underscore 
      Ps = 5 -> Bold 
      Ps = 7 -> Inverse

`ESC [ Ps n'
      Device Status Report (DSR) 
      Ps = 5 -> Status Report ESC [ 0 n -> OK 
      Ps = 6 -> Report Cursor Position (CPR) [row;column] as ESC [ r ; c
     R

`ESC [ Ps ; Ps r'
      Set Scrolling Region [top;bottom] (default = full size of window)
     (DECSTBM)

`ESC [ Ps x'
      Request Terminal Parameters (DECREQTPARM)

`ESC ] Ps ND string NP'
      OSC Mode 
      ND can be any non-digit Character (it's discarded) 
      NP can be any non-printing Character (it's discarded) string
      can be any ASCII printable string (max 511 characters) 
      Ps = 0 -> use string as a new icon name and title 
      Ps = 1 -> use string is a new icon name only 
      Ps = 2 -> use string is a new title only 
      Ps = 46 -> use string as a new log file name

`ESC c'
      Full Reset

`ESC n'
      Switch to Alternate Character Set LS2

`ESC o'
      Switch to Alternate Character Set LS3

`ESC |'
      Switch to Alternate Graphics(?) Set LS3R

`ESC }'
      Switch to Alternate Graphics(?) Set LS2R

`ESC ~'
      Switch to Alternate Graphics(?) Set LS1R